 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RF (Radio Frequency) Type [2-Channel (Form A) Type] --Low On resistance-- 2. Applicable for 2 Form A use as well as two independent 1 Form A use 3. Compact 8-pin DIP size The device comes in a compact (W) 6.4x(L) 9.78x(H) 3.9 mm (W) .252x(L) .385x(H) .154 inch , 8-pin DIP size (through hole terminal type). 4. Low capacitance between output terminals ensures high response speed: The capacitance between output terminals is small, typically 10 pF. This enables for a fast operation speed of 200 s. 5. High sensitivity and low On resistance: Maximum 0.16 A of load current can be controlled with input current of 5 mA (AQW225N). The 10 On resistance is less than our conventional models. With no metallic contacts, the PhotoMOS relay has stable switching characteristics. PhotoMOS RELAYS 6. Low-level off state leakage current: The SSR has an off state leakage current of several milliamperes, whereas the PhotoMOS relay has only 30 pA even with the rated load voltage of 80 V (AQW225N). 7. Controls low-level analog signals: PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion. 8. Low terminals electromotive force: (approx. 1 V) 9.78 .385 6.4 .252 3.90.2 .154.008 9.78 .385 6.4 .252 3.60.2 .142.008 mm inch 1 2 3 4 8 7 6 5 FEATURES 1. PhotoMOS relay 2-channels (Form A) type with high response speed, low leakage current and low On resistance. TYPICAL APPLICATIONS * Measuring equipment * Scanner, IC checker, Board tester TYPES Part No. Output rating* Type Load voltage 80 V AC/DC type 200 V 400 V Load current 120 mA 50 mA 40 mA Through hole terminal Tube packing style AQW225N AQW227N AQW224N AQW225NA AQW227NA AQW224NA Surface-mount terminal Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQW225NAX AQW227NAX AQW224NAX AQW225NAZ AQW227NAZ AQW224NAZ Packing quantity Tube 1 tube contains 40 pcs. 1 batch contains 400 pcs. Tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage Ipeak Pout PT Viso Topr Tstg Symbol IF VR IFP Pin VL IL AQW225N(A) AQW227N(A) 50 mA 3V 1A 75 mW 200 V 0.05 A (0.07 A) 0.15 A 800 mW 850 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Non-condensing at low temperatures AQW224N(A) Remarks Input f = 100 Hz, Duty factor = 0.1% 400 V 0.04 A (0.05 A) 0.12 A 80 V 0.12 A (0.16 A) 0.36 A Peak AC, DC ( ): in case of using only 1 channel A connection: 100 ms (1 shot), VL = DC 155 AQW22rN 2. Electrical characteristics (Ambient temperature: 25C 77F) Item LED operate current Input LED turn off current LED dropout voltage On resistance Maximum Output Typical Output capacitance Maximum Off state leakage current Turn on time* Maximum Ileak Ton Toff Ciso Riso Cout 15 pF 10 nA 0.20 ms 0.5 ms 0.08 ms 0.2 ms 0.8 pF 1.5 pF 1,000 M Typical Maximum Minimum Typical Typical Maximum Typical Ron Symbol IFon IFoff VF 7 10 AQW225N(A) AQW227N(A) AQW224N(A) 0.9 mA 3.0 mA 0.4 mA 0.8 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 30 50 10 pF 70 100 Remarks IL = Max. IL = Max. IF = 5 mA IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 f = 1 MHz IF = 0 VL = Max. IF = 5 mA IL = Max. IF = 5 mA IL = Max. f = 1 MHz VB = 0 500 V DC For type of connection, see page 32. Transfer characteristics Typical Maximum Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/O isolation resistance Minimum Switching speed Note: Recommendable LED forward current IF = 5mA. *Turn on/Turn off time Input 90% Output Ton Toff 10% s For Dimensions, see Page 27. s For Schematic and Wiring Diagrams, see Page 32. s For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F 140 120 Load current, mA 100 80 60 40 20 0 -40 -20 0 20 40 60 80 85 100 AQW227N AQW224N AQW225N 10.0 On resistance, AQW225N 8.0 6.0 4.0 2.0 0 On resistance, 100 80 60 40 20 0 AQW224N 2.-(1) On resistance vs. ambient temperature characteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 12.0 2.-(2) On resistance vs. ambient temperature characteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 AQW227N -40 -20 Ambient temperature, C 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 80 85 Ambient temperature, C 156 AQW22rN 3. Turn on time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 1.0 4. Turn off time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.5 5. LED operate current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED operate current, mA 0.8 Turn on time, ms Turn off time, ms 0.4 4 0.6 AQW225N 0.4 AQW227N AQW224N 0.3 3 0.2 AQW225N 0.1 AQW224N AQW227N -40 -20 0 20 40 60 80 85 2 AQW225N AQW227N 0.2 1 AQW224N 0 -40 -20 0 20 40 60 80 85 0 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C Ambient temperature, C Ambient temperature, C 6. LED turn off current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 7. LED dropout voltage vs. ambient temperature characteristics Sample: All types; LED current: 5 to 50 mA 1.5 LED dropout voltage, V 1.4 1.3 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Current, mA 150 100 50 AQW227N AQW224N AQW225N LED turn current, mA 4 3 -4 1.2 1.1 1.0 0 -40 -20 0 20 40 60 80 85 50mA 30mA 20mA 10mA 5mA -3 -2 -1 1 -50 -100 -150 3 4 2 Voltage, V 2 AQW225N 1 AQW224N -40 -20 0 20 40 AQW227N 60 80 85 0 Ambient temperature, C Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 10. LED forward current vs. turn on time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 1.4 1.2 1.0 0.8 AQW225N 0.6 0.4 0.2 AQW224N*AQW227N 11. LED forward current vs. turn off time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 0.22 10-6 Off state leakage current, A Turn off time, ms 0.18 Turn on time ms 10-9 AQW224N AQW227N AQW225N 10-12 0 100 300 200 Load voltage, V 400 0.14 0.10 AQW225N AQW224N AQW227N 0.06 0 0 0 10 20 30 40 50 60 0 10 20 30 40 50 60 LED forward current, mA LED foward current, mA 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz, 30 mVrms; Ambient temperature: 25C 77F Output capacitance, pF 12 13. Isolation characteristics (50 impedance) Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 14. Insertion loss characteristics (50 impedance) Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 6 100 Isolation, dB 80 60 40 AQW225N,AQW227N 20 AQW224N 0 20 40 60 80 100 Applied voltage, V 0 10 4 5 Insertion loss, dB 4 3 10 8 6 4 2 0 AQW225N AQW227N AQW224N AQW224N AQW227N 2 1 0 AQW225N 104 105 106 Frequency, HZ 10 7 10 5 10 Frequency, HZ 6 10 7 5/7/2001 All Rights Reserved, (c) Copyright Matsushita Electric Works, 157 Ltd. Go To Online Catalog |
Price & Availability of AQW227N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |